News Center

The construction of electromechanical equipment installation projects involves five branches and is quite diverse. The project must proceed in an orderly manner and must make preparations in advance. Based on the construction process of each unit, determine the installation project and construction procedures for electromechanical equipment. The organizational design for phased construction should consider the following issues: phased implementation, with construction control focusing on ensuring the construction schedule while also considering other factors, to ensure timely production.

1. Most companies today are equipped with automated machinery and equipment, giving rise to the profession of electromechanical equipment installation engineering. Installation of equipment, lines, and pipelines; substation projects of 35kV and below; production and installation of non-standard steel components; general industrial, public, and civil construction projects.

The total time constant for overflow maintenance is the total time constant of the current element and the total time constant of time element 2. The all-time constant of the overload alarm is the all-time constant of the overload current element and the all-time constant of component 3. Overvoltage normalization constant—overvoltage range-normalization constant and overvoltage normalization constant: 4. The three-phase power supply is the constant for the entire reclosing process - the constant for the entire reclosing process and the constant for the reclosing angle 5. Zero-sequence overflow maintenance all-time constants—the all-time constant of the current element, the all-time constant of the time element, and the all-time constant of the direction element. Transformer operation switching test

With the advancement of standardization and modernization of production equipment, especially the application of automated equipment, the installation and commissioning process of electromechanical equipment has become increasingly chaotic, and the degree of specialization has been further refined. The equipment installation specialty is gradually shifting toward a skill-intensive direction, which significantly hinders the construction cycle of electromechanical equipment installation projects.

There are three processes in electromechanical equipment installation engineering: 1. Installation of embedded parts for steel pipes, plastic pipes, and other electrical conduits must comply with the relevant provisions of Chapter 3 of GB50186-92 and Chapter 2 of GB50258-96. According to the construction drawings, the end of the embedded electrical steel pipe is led out, and a galvanized iron wire with a diameter of no less than 2mm is threaded through the steel pipe, with the end exposed outside the terminal.

Installation of electromechanical equipment belongs to installation engineering. Electromechanical installation is a large-scale project. Some large enterprises relocate, and a single project can take nearly half a year to implement. Moreover, the technical requirements for installation are quite substantial