2022-11-03 16:48:49
When relocating the factory, small equipment is manageable, but large equipment requires contact with professionalsEquipment relocationThe company carried out equipment hoisting and relocation. Let's take a look at the commonly used equipment relocation methods:
1. Relocation of sedans and flatbed trucks.
For large machinery and equipment, most components belong to over-length, overwidth, or overheight overweight equipment. When the machinery and road conditions permit, short-distance transportation of such machinery and components is generally carried out using sedan flatbeds (characteristics: environmental protection, environmental pollution, etc.) for relocation. Some require two or more flatbed trailers before transport, and a plan must be made before transport, and based on simulation (definition: a virtual replication of real work or the entire process), a clear understanding is in mind when the trial operation is carried out.
2. Methods for relocating railway flat cars.
Where conditions permit, temporary tracks can be laid in factories to facilitate relocation using railway flat cars. When using railway flat cars, straight tracks should be laid as much as possible and pulled by winches. Before relocating machinery and equipment, conduct an investigation of the old factory, including equipment characteristics, relocation details, customer requirements, and timeline progress, and develop a scientifically researched and rigorous relocation plan. When two railway flat cars are selected to jointly move large machinery or components on folding tracks, it is necessary to set turntables on one or both railway flat cars to facilitate direction adjustment.
3. Rollover relocation method.
In some cases, for medium and large machinery, short-distance relocation of components can be moved using the rollover relocation method. This method involves placing machinery, equipment, and components on a mop cloth, placing a certain number of roll bars underneath the mop cloth, laying them on boards, and using traction equipment to pull the equipment. The machinery then moves along a designated path to prepare in advance for lifting the machinery and equipment. Before hoisting, it is necessary to conduct thorough and thorough inspection and verification of the equipment, verifying whether the installation reference markings and azimuth line markings are appropriate; Check whether the lifting lugs of the machinery and equipment comply with the lifting regulations.
4. Sliding relocation method.
The main machinery, equipment, and components of sliding relocation are less flexible than those relocated by the tumble transfer method. Generally, only linear relocation is needed in horizontal positions, but large machines are not as flexible as they are when moving in a straight lineEquipment relocationthe height of the lift is lower than that of the rollover relocation method, so when moving equipment with a tall body and large base area on site, sliding cloud floating can be used. The Hongda Hoisting and Relocation Service Department must conduct detailed safety inspections of the working positions, safe installations, and lifting and rigging of various lifting machinery. The safe installation of hoisting machinery and equipment should be reliable and active. Additionally, inspections should be conducted on various types of machinery and equipment such as lifting machinery, wire ropes, air ropes, chains, hooks, and safety installations. It is necessary to ensure safety and reliability, and working with faults is prohibited. Before lifting, it is necessary to conduct a trial lifting inspection and only proceed with operation after confirming everything is correct.
Along with the development trends of China's economy, cities are undergoing significant transformations. In enterprises like #naipan#, for new machinery and equipment with unique significance, large-scale machinery hoisting, hoisting, and relocation brings significant economic and social development benefits.
