2022-10-27 15:48:19
No matter the industry, when it comes to applied liftingEquipment installationAt this time, it is necessary to conduct safety inspections of the lifting equipment and carry out protective maintenance on the lifting equipment. If any abnormalities occur, they should be properly handled to ensure the safe operation of the lifting machinery and prevent accidents involving injury or fatalities. It not only undertakes the development of new projects, but also takes on the lives and assets of construction workers. Taixin Crane Equipment Friendship Reminder: It is essential to be deployed, inspected, and maintained on time to ensure full confidence.
The reasons need to be examined from the following three aspects: check whether various safety covers, guardrails, lithium battery protection boards, and herringbone ladders for lifting equipment are complete and reliable, and that exposed equipment on the crane can cause wounds and joints.
Lifting equipment installation connections, sprocket chains, drive chains, conveyor belts, and other rotating components all have protective covers. The crane can be used for pedestrian safety passages, climbing stairs, and may have safety guardrails that may expose personnel, and ensure compliance with regulations.
Outdoor crane electrical equipment should be equipped with rain covers.
Whether the actuator brakes and types of brakes meet design requirements, and whether the brake support rods and torsion springs have fatigue deformation and cracks, as well as excessive shaft pins, shafts, brake wheels, brake friction pads, or hydraulic brake oil leakage; Brake clearance adjustment and braking characteristics can meet the requirements.
Safety inspection method for the eight general components of cranes: Check whether the hooks and anti-detachment marks meet the requirements, and whether the hooks are cracked or gaped, etc. Remove some hooks, improve the level of openness, distort and deformation, and whether it exceeds the standard; No fatigue, deformation, gaps, or related shaft pins, neck and surface damage on hooks.
Check the liftEquipment installationWire rope standard types, type standards, and rollers must comply with design rules. Positioning and installation of the wire rope, such as whether the fixed end of the wire rope, the wire rope clamp, and the pulley comply with regulations. Damage to wire ropes, cracked wires, knots, compression, bending, cracking, etching, etc.
