2022-10-19 15:53:57
1. Develop a plan, starting with the easy before the difficult, starting with the outside before the inside. To avoid blind operation, it is necessary to understand the relevant drawings and equipment before disassembling the equipment to ensure the factory is secureEquipment relocationSuccessfully completed.
2. It is essential to ensure that water, gas, and power control is off when disassembled. Therefore, it is necessary to understand the equipment relocation environment and know the specific operating locations for water, gas, and gas operations.
3、Equipment relocationDuring equipment transfer, if the electrical shutdown occurs, a "stop switching" sign must be hung, construction must strictly follow electrical safety procedures, and technical measures must be provided to prevent accidental power supply.
4. Equipment Relocation: When open flame operation is required, fire prevention measures must be in place, with dedicated personnel supervising. Open flames must be strictly prohibited near flammable and explosive materials, and fire safety regulations must be strictly followed. At the same time, avoid cross-sectional work as much as possible. When working at heights, it is necessary to wear a safety belt, and the seat belt suspension must comply with safety regulations.
5. When disassembling equipment and hoisting equipment, it is necessary to avoid damaging the factory building and equipment. It is best to assign dedicated safety inspectors on-site to promptly check and eliminate unsafe factors.
6. During factory relocation and loading/unloading, if equipment with unusual shapes is specially shaped, it must be loaded with sensitivity. There are several key points to note: first, fix the pressure points. For minor bumps, vibration absorption measures must be used to avoid bumps.
7. Factory relocation involves precision equipment. First, the weakest parts of the equipment must be clearly identified and special protection must be implemented. Generally, vibration-damping methods such as air cushion membranes and blankets are used. Careful handling is also required when using lifting equipment during relocation.
8. For equipment with poor balance, it is best to add a load-bearing balance base to stabilize the equipment and prevent tilting and bumps.
9. If the equipment is relatively high, professional hand chain hoists and specialized rope tensioners can be used to secure the equipment and both sides of the truck bed, making transportation easier.
