Industry Information

FactoryEquipment relocationPreparation:

1. Provide skills briefings to all construction personnel, including the construction process requirements, quality requirements, and precautions for each individual project. All construction personnel must be familiar with the site, drawings, standards, and procedures, ensuring everyone has a clear understanding and does not operate blindly.

2. Prepare all construction machinery, testing instruments (meters), cleaning equipment, labor protection supplies, etc., according to the owner's and standard requirements. They should be inspected, accepted, stored, and maintained.

3. Equipment inspection, including the following content:

A. Check the appearance of the device.

B. The machining accuracy of the equipment is based on the workpieces produced on site; sample workpieces will be packaged and shipped randomly later.

C. Check the equipment accuracy.

D. Recognize the skill parameters and operational status of the equipment.

E. The orientation and operating positions of the surveying equipment, and the preparation of relevant schematic diagrams.

The above inspection should be detailed and signed by the on-site representatives of both parties as the basis for the equipment.

FactoryEquipment relocationSymbol:

To facilitate dismantling, restoration, and smooth equipment removal, a consistent symbolic method is used, namely the digital symbol method. The basic method for electrical equipment removal is the same, and some symbols are added accordingly according to the disorder level of the equipment.

Second, to determine the positioning of each production line's equipment within the production line, equipment should be calibrated sequentially according to the process flow direction of each production line. The principle of calibration is to calibrate each separable device that completes a certain process as a distinct unit.

Equipment disassembly must be considered comprehensively. When opening and reassembling, while maintaining the original precision requirements, convenience of packaging should be considered. If there is a conflict between the two, it is necessary to ensure accuracy and operational functionality.

Limiters, limit switches, and contactless switches on each line (equipment) should not be removed as much as possible when conditions permit, in order to reduce adjustment work after the equipment. If disassembly is necessary, it is necessary to strictly determine the relative orientation and spacing between the probe and the feed (or stopper), mark the equipment position, record it properly, and draw a sketch.

Based on future equipment data shortages, calibrate each row of equipment, create relevant positioning dimensions, and record specific data to facilitate re-equipment.

For the connection between two devices, there should be reset markers and positioning symbols, which should be as consistent as possible on the same line, and parts can be numbered according to the orientation of the connecting equipment.

For devices with difficult-to-determine direction, there should be prominent device directional symbols.