2022-10-18 17:44:32
You know how to soften waterEquipment installationResin filling?
1. Before filling, the lifting pipe (brought into the distributor) should be placed at the center of the resin tank body, 0.5mm below the tank opening, and sealed with tape to prevent resin from entering the lifting pipe.
2. Inject resin into the resin tank along the pores around the lifting pipe and spread it flat at the bottom of the tank.
3. Pour the treated resin into the resin tank along the edges of the lifting tube according to the prescribed filling amount.
4. The above operations should ensure that the lifting pipe is always kept at the center position of the resin tank inlet.
5. Remove the sealing tape from the lifting tube.
6. After installing the distributor, align the controller socket with the upright lift pipe, and carefully roll the control valve clockwise until the valve is tightened to the tank interface.
