2022-08-04 16:07:24
Softens the waterEquipment installationRequirements
1. Water softening equipment should be installed on a solid cement platform, with drainage ditches set up nearby.
2. The installation of salt tanks should be close to resin tanks, and the length of the salt suction pipeline should be minimized as much as possible.
3. The ambient temperature must not be lower than 2°C or higher than 5°C.
4. When the softened water equipment is directly connected to the installation equipment, the pipeline section should be maintained for at least 3 meters, and check valves should be installed.
5. Make it easier for regenerants to refill the gap.
6. Equipment should be adjacent to sufficient operating and protective spaces.
