Company news

Installation of electromechanical equipment: Introduces several common non-standard phenomena in wiring engineering implementation:

1. The cable is tightly tied.

Laying cables is the kind of consolidated wiring that many companies hope to achieve. It looks visually appealing, but in most cases, the cable connections are firm. For example, communication cables generally have thin cores, so when laying multiple cables together, if the cables are too tightly tied, crosstalk is likely to occur, especially the outer surface of the cables is prone to cracking, making loss unavoidable.

2. Excessive cable reservations.

For construction workers, after wiring, the cabinet should be organized according to standards: cables are horizontal and vertical, but there are often unblocked cables under the cabinet. Having so many pre-ordered cables piled up will naturally affect the wiring quality, but if temperature affects later on, communication performance will also decrease.

3. Lay the weak current cable together.

Weak current installation occurs in many data centers and wiring, but it does not comply with relevant standards, and some standards have specific rules. Because weak current cables differ from strong current cables, the electromagnetic waves generated by strong current cables affect their performance and data disarray.

4. Cable bending radius is too large.

During wiring construction, the bending radius of transitional cables is common, and due to limited space in distribution trays, cable performance degrades. Over time, the cable's electrical performance will suffer from long-term excessive bending and damage. For the cable's external protective layer, as time passes, climate and temperature change, greatly shortening the sheath's service life and thus affecting the cable's lifespan.

This shows that in inductive wiring engineering, details must determine quality! To ensure the overall quality of the inductive wiring project, we pay attention to detail, as this is the foundation for guaranteeing quality. However, to achieve standardized and regulated construction in the details, we need a good inductive cabling company to handle it.