2022-09-22 15:53:05
Equipment installationIn short, it means placing and installing all parts of the equipment according to drawings and quality standards, so that operations can proceed according to the intended requirements. When installing welding machinery and equipment, pay attention to the following issues:
1. Before installing the equipment, it is necessary to understand the principles, structure, technical performance, connection of the equipment, and quality standards. Carefully inspect the condition of all components; there must be no defects. A proper installation plan must be formulated and thorough preparation made to ensure smooth operation.
2. Before equipment installation, carefully read the equipment specification manual, especially the safety precautions specified in the document. Installation must be carried out only after personnel wear protective clothing. Wiring such as soldering power supply should use cables with appropriate cross-sectional areas as required by the drawings.
3. The foundation is an important component of equipment and plays a crucial role in its safe operation. The foundation of large equipment must be constructed according to the drawings, the quality of concrete pouring must meet requirements, and the quality of the shaded works should be carefully inspected and recorded. For areas with minimal force and no safety impact, expansion plugs or similar methods can be used according to the manufacturer's requirements, but the fixation must be firm and not loose. Requirements for track spacing and flatness must meet the manufacturer's requirements.
4. The main device of the equipment must be installed when the equipment is powered off. All components and the electrical control box must be fully installed before allowing external power connection to the equipment's control box.
5. Equipment alignment.Equipment installationaccuracy, including straightness, levelness, and positional deviations between them, all must meet the standards. The work performed to achieve this goal is called alignment. This is a very detailed assignment, closely connected to each other. After installation, the requirements of the drawings must be met.
6.Equipment installationAfterwards, the equipment management department organizes personnel from the unit unit, user workshop, safety, quality inspection, and other relevant departments to conduct the inspection. After careful inspection and testing, the equipment's technical condition meets quality standards, safety devices are complete and reliable, and the equipment operates normally. Only after passing inspection can it be put into use.
